|
 Manual Grease Pumps
Manual grease pump meant for feeding grease to bearing & other moving part of machines & other lightly machines having 1 to 20 lubrication Point. These pumps is made up of purely transparent acrylic reservoir for storage of grease. For sensing the grease level at tell tale rod is provide and follower plate assembly for help in positive suction of grease. It contains two outlet part of M10 x 1 BSP right and left side in which one is used as air bleed valve & second port used as a outlet. To check reverse flow of grease, a non return valve is provide in the system at the outlet port. Grease can be filled manually or with another pump. Filling from pump M10 x 1 BSP/Grease nipple port is provide. Manually, we have to remove follower plate, spring, top cover and fill the grease from the top of the reservoir and to fit all the components by pressure. For air removing unscrew the bleed plug pull the handle maximum out and press the follower plate by knob till grease comes out from bleed plug. A progressive block is used to distribute the grease to the available lubrication points in sequence one after another. Progressive Blocks are added as per requirements. Technical Specifications
|
Model
|
Reservoir
|
Discharge
|
Max. Pressure
|
Wall Mounting
|
|
LMGP-500-3
|
Capacity 5 Kg.
|
3cc Per Stroke
|
150 Kg/cm2
|
4 Holes, 7 Dia.
|
|
LMGP-1000-4
|
Capacity 1 Kg.
|
4 cc per Stroke
|
120 Kg/cm2
|
4 Holes, 7 Dia.
|
|
LMGP-1500-6
|
Capacity 4.5 Kg
|
6cc Per stroke
|
100 kg/cm2
|
4 Holes, 9 Dia.
|
|
LMGP-2000-6
|
Capacity 2 kg.
|
6 cc Per Stroke
|
100 Kg/cm2
|
4 Holes, 9 Dia.
|
Note: We are also manufactured special pump as per customer requirements.
|
